What to Do If Your House Key Won't Turn in the Lock
Key Won't Turn? Try These Steps First
You put your house key in the lock, try to turn it, and it won't budge. Before you call a locksmith, try these steps — they fix the problem about half the time.
Step 1: Make Sure You're Using the Right Key
It sounds silly, but it's the most common cause. If you have similar keys on your keychain (house key, car key, mail key, work key), you may be using the wrong one. Check that the key you're using is your house key.
Step 2: Check the Key for Damage
Look at the key closely:
- Is it bent? A bent key won't align with the pins. Straighten it gently with pliers (don't break it).
- Is it worn? A key that's been used for years may have worn-down cuts. If you have a spare, try the spare — if it works, your key is worn and needs replacing.
- Is it a new copy that doesn't work? Poorly cut copies may not work. Get a new copy from a locksmith, not a hardware store kiosk.
Step 3: Wiggle and Jiggle
Sometimes the pins are just slightly misaligned. Try:
- Insert the key fully, then pull it out about 1/16 inch
- Apply light turning pressure while gently wiggling the key in and out
- Don't force it — if it doesn't turn with gentle pressure, stop
This can sometimes nudge a stuck pin into place. If it works, the lock may need cleaning or rekeying soon — the pins are wearing.
Step 4: Lubricate the Lock
If the lock feels gritty or the key goes in roughly, the lock may be dry or dirty.
Use: Graphite powder or a PTFE-based lock lubricant. Insert the nozzle into the keyhole, give a short spray, insert the key, and work it in and out several times.
Don't use: WD-40 (it's a solvent, not a lubricant — it attracts dirt and makes the problem worse over time), or oil (it gums up the pins).
If lubrication fixes the problem, the lock should work smoothly. If it's still stiff, the lock needs professional cleaning or rekeying.
Step 5: Check the Door Alignment
If the door has shifted (due to humidity, settling, or loose hinges), the bolt may not align with the strike plate. You'll feel the bolt binding against the metal.
Test: Push or pull the door while turning the key. If it turns when you push/pull but not when the door is in its natural position, the alignment is off.
Fix: The strike plate needs repositioning or the hinges need adjusting. See our guide on fixing a jammed door lock for more details.
Step 6: Check for Weather Issues
In DFW's humid climate, wooden doors swell in humid weather and shrink in dry weather. A swollen door can misalign the bolt with the strike plate.
If the problem comes and goes with the weather, the door is swelling. A locksmith can adjust the strike plate or hinges to accommodate the movement.
When to Call a Locksmith
If none of the above fixes the problem, it's time to call a professional. The issue may be:
- Worn or broken lock pins — the lock needs rekeying or replacement. See our house rekeying guide.
- A broken key — if the key is about to break, don't force it. See our guide on what to do if your key breaks in the lock.
- A damaged lock cylinder — the lock needs replacement.
- A frozen lock (rare in DFW) — use a lock de-icer.
What NOT to Do
- Don't force the key. If it won't turn with normal pressure, forcing it can break the key off in the lock — a much bigger problem.
- Don't use pliers to turn the key. This bends and breaks the key.
- Don't drill the lock yourself. Drilling is a last resort and should be done by a professional.
- Don't spray WD-40. It makes the problem worse over time.
Call DFW Key Master
If your house key won't turn and the DIY steps don't work, call (682) 666-2966. We come to your home anywhere in DFW, diagnose the problem, and fix it on the spot — 24/7. See also our guide on fixing a jammed door lock for more troubleshooting.
Need a Locksmith Right Now?
DFW Key Master is available 24/7 throughout Dallas-Fort Worth. Call for a firm, upfront quote.